You will get efficient and thoughtful service from Felici Machinery.
How to operate an Industrial Intelligent Sweeping Robot?
Step 1: Turn on the Robot.
Press the power button located at the back of the robot to turn on the machine.
Step 2: Select the cleaning mode.
Use the control panel or the remote control to select the cleaning mode according to the cleaning requirements. The robot can clean in different modes, such as spot cleaning, edge cleaning, and auto cleaning.
Step 3: Set up the cleaning schedule.
The Industrial Intelligent Sweeping Robot can be programmed to clean automatically at specific times. To set up a cleaning schedule, use the control panel or the mobile app linked to the robot.
Step 4: Monitor the cleaning progress.
During the cleaning process, keep an eye on the robot to make sure it is functioning correctly. Check to see if the robot has encountered any obstacles and make adjustments as needed.
Step 5: Empty the dustbin.
Once the cleaning is completed, the robot will return to its dock. Empty the dustbin and clean the filter for the robot to perform optimally during the next cleaning cycle.
How to use traditional cleaning methods?
Step 1: Assemble the cleaning supplies.
Gather the necessary cleaning supplies such as a broom, dustpan, mop, bucket, and cleaning solution.
Step 2: Sweep the floors.
Sweep the floors thoroughly, using a broom to collect all visible dirt and debris into a dustpan.
Step 3: Mop the floors.
Fill a bucket with water and the desired cleaning solution. Dip the mop into the solution and wring it out to remove excess water. Mop the floors in sections, working from the farthest corner of the room to the entrance.
Step 4: Rinse the mop.
If using a traditional mop, rinse it in a bucket of clean water after mopping each section. If using a reusable mop head, detach it from the wand and wash it in a washing machine when finished.
Step 5: Dry the floors.
Once the mopping is finished, use a dry mop or towel to remove any excess water on the floor and allow the floors to air-dry.
Step 6: Clean the cleaning tools.
Clean and disinfect all cleaning tools after use, ready for use the next time they are needed.
Conclusion.
In comparison to traditional cleaning methods, Industrial Intelligent Sweeping Robots provide numerous advantages such as increased efficiency, decreased labor cost, and improved cleaning quality. By using an Industrial Intelligent Sweeping Robot, not only is the cleaning process more efficient, but it is also more thorough. On the other hand, traditional cleaning methods require much more time and effort and do not offer the same level of sanitation.